Get Reliable Heat Pump Installation and Heat Pump Repair Service in Greensboro and Surrounding Areas
Whether you reside in Greensboro or one of the surrounding suburbs, a heat pump may be the best reliable choice for you and your family. Heat pumps are efficient, and even though the name says “heat” pump, it performs both heating and cooling within your home. Given that these units use electricity, and are efficient at using it, they are one of the most sustainable and efficient ways to heat and cool your home. In addition, if you have Duke Energy, your electricity may come from natural gas, nuclear, or even solar or another source, which makes this option extremely green. Check here to determine what method of power generation is used for your zip code.
Gentry Air can install a unit that can heat and cool your home, plus save you money. Greensboro homeowners can enjoy the experience of lower energy bills with a new heat pump installation. In addition, if you want to learn more, give Gentry Air a call. We have HVAC specialists on our team, and we can walk through any questions that you may have regarding.
Are Heat Pumps a More Energy Efficient Choice for the Greensboro NC and Surrounding Areas?
Even though a heat pump is extremely energy efficient, most people within the Greensboro NC area choose a heat pump is due to our climate. These systems perform exceptionally well in warmer climates. While it does get somewhat chilly in Greensboro and surrounding areas, today’s systems can work to heat a home even when it gets as cold as below 20 degrees and even colder.
Want to Understand How a Heat Pump Works?
- Evaporation: Refrigerant starts the process. As soon as the refrigerant starts circulating through the system, it absorbs heat from the air. This process causes the air to turn into gas.
- Compression: Once the refrigerant is turned into a gas state, it is compressed by the compressor. As it is compressed, the temperature and pressure increases.
- Condensation: High-pressure gas that is extremely hot moves to the condenser coil. This is where it is released into its surrounds (like indoors to warm your home). The refrigerant comes goes back to a gas liquid state.
- Expansion Valve: After condensation happens, the liquid refrigerant goes through a capillary tube or expansion valve, where the pressure is lowered. The drop in pressure enables the refrigerant to cool quickly.
- Return to the Evaporator: The cooler, low-pressure liquid cycles back to the evaporator coil. This is where the cycle begins again and repeats.
Once a heat pump is in the heating function, it reverses and heats the home. When the heat cycle is running, the heating element strip heats the air that is circulating. It’s during this mode that cool air is expelled outside.
How Can You Tell if a Heat Pump is Starting to Go Out? Are There Signs Before a Heat Pump Goes Bad?
Yes, there are a few ways to determine if your unit has seen better days or needs a repair or service. If you see, hear, or smell any of these signs, give Gentry Air a call, and we’ll come take a look.
- Your heat pump isn’t turning on or off.
- Your heat pump is not providing heat or cool air.
- You start smelling an odd smell.
- You see some water leaks around the heat pump itself or the air handling unit.
- You start to feel inconsistent airflow or room temperatures are not the same throughout your home.
What Should I Check if my Heat Pump Isn’t Working?
- Check the Thermostat First: Thermostats typically have a bit of delay between the cooling and heating cycles. The delay usually last around five minutes or so.
- Check the Air Filter: While this may seem like something that homeowners check often, not everyone does. Also, air filters play a large
- Look at the Breaker Box: Check your breaker box just to be sure that the breaker didn’t trip. Sometimes this is the case, albeit rare. If it gets cold outside, heat pumps can use a lot of energy when first coming on in the emergency heat mode—especially when it’s cold outside.
- Is Your Emergency Heat Setting Working?: Try and see if your emergency heat setting is working. Once you turn it on, look at your thermostat and see if it displays "emergency heat" or "auxiliary heat". Check to see if the air is blowing warm or not. Feel free to give us a call at any time. We’re happy to help.